Datasheet

System Integration Module (SIM)
MC68HC908GR16 Data Sheet, Rev. 5.0
194 Freescale Semiconductor
15.7.3 Break Flag Control Register
The break control register (BFCR) contains a bit that enables software to clear status bits while the MCU
is in a break state.
BCFE — Break Clear Flag Enable Bit
This read/write bit enables software to clear status bits by accessing status registers while the MCU is
in a break state. To clear status bits during the break state, the BCFE bit must be set.
1 = Status bits clearable during break
0 = Status bits not clearable during break
Address: $FE03
Bit 7654321Bit 0
Read:
BCFERRRRRRR
Write:
Reset: 0
R= Reserved
Figure 15-23. Break Flag Control Register (BFCR)