Datasheet

Break Module (BREAK)
Technical Data MC68HC908JB8•MC68HC08JB8•MC68HC08JT8 — Rev. 2.3
252 Break Module (BREAK) Freescale Semiconductor
17.6.4 Break Flag Control Register (BFCR)
The break control register contains a bit that enables software to clear
status bits while the MCU is in a break state.
BCFE — Break Clear Flag Enable Bit
This read/write bit enables software to clear status bits by accessing
status registers while the MCU is in a break state. To clear status bits
during the break state, the BCFE bit must be set.
1 = Status bits clearable during break
0 = Status bits not clearable during break
Address: $FE03
Bit 7654321Bit 0
Read:
BCFERRRRRRR
Write:
Reset: 0
R=Reserved
Figure 17-7. Break Flag Control Register High (BFCR)