Datasheet

System Integration Module (SIM)
Technical Data MC68HC908JB8•MC68HC08JB8•MC68HC08JT8 — Rev. 2.3
116 System Integration Module (SIM) Freescale Semiconductor
8.8.3 Break Flag Control Register
The break control register contains a bit that enables software to clear
status bits while the MCU is in a break state.
BCFE — Break Clear Flag Enable Bit
This read/write bit enables software to clear status bits by accessing
status registers while the MCU is in a break state. To clear status bits
during the break state, the BCFE bit must be set.
1 = Status bits clearable during break
0 = Status bits not clearable during break
Address: $FE03
Bit 7654321Bit 0
Read:
BCFERRRRRRR
Write:
POR:
0
R
= Reserved
Figure 8-20. Break Flag Control Register (BFCR)