Datasheet

System Integration Module (SIM)
Data Sheet MC68HC908LJ24/LK24 — Rev. 2.1
162 System Integration Module (SIM) Freescale Semiconductor
9.8.3 SIM Break Flag Control Register
The SIM break control register contains a bit that enables software to
clear status bits while the MCU is in a break state.
BCFE — Break Clear Flag Enable Bit
This read/write bit enables software to clear status bits by accessing
status registers while the MCU is in a break state. To clear status bits
during the break state, the BCFE bit must be set.
1 = Status bits clearable during break
0 = Status bits not clearable during break
Address: $FE03
Bit 7654321Bit 0
Read:
BCFERRRRRRR
Write:
Reset: 0
R= Reserved
Figure 9-22. SIM Break Flag Control Register (SBFCR)