Datasheet

MSCAN Controller
Technical Data MC68HC912D60A — Rev. 3.1
342 MSCAN Controller Freescale Semiconductor
IDHIT2 – IDHIT0 — Identifier Acceptance Hit Indicator
The msCAN12 sets these flags to indicate an identifier acceptance hit
(see Identifier Acceptance Filter). Table 17-8 summarizes the
different settings.
The IDHIT indicators are always related to the message in the
foreground buffer. When a message gets copied from the background to
the foreground buffer the indicators are updated as well.
NOTE: The CIDAC register can only be written if the SFTRES bit in CMCR0 is
set.
17.13.11 msCAN12 Receive Error Counter (CRXERR)
This register reflects the status of the msCAN12 receive error counter.
The register is read only.
Table 17-10. Identifier Acceptance Hit Indication
IDHIT2 IDHIT1 IDHIT0 Identifier Acceptance Hit
0 0 0 Filter 0 Hit
0 0 1 Filter 1 Hit
0 1 0 Filter 2 Hit
0 1 1 Filter 3 Hit
1 0 0 Filter 4 Hit
1 0 1 Filter 5 Hit
1 1 0 Filter 6 Hit
1 1 1 Filter 7 Hit
Bit 7654321Bit 0
CRXERR R RXERR7 RXERR6 RXERR5 RXERR4 RXERR3 RXERR2 RXERR1 RXERR0
$010E W
RESET 00000000