Datasheet

Bus Control and Input/Output
Registers
MC68HC912DT128A — Rev 4.0 Technical Data
MOTOROLA Bus Control and Input/Output 113
These bits select reduced drive for the associated port pins. This
gives reduced power consumption and reduced RFI with a slight
increase in transition time (depending on loading). The reduced drive
function is independent of which function is being used on a particular
port.
This register is not in the map in peripheral mode.
Normal: write once; Special: write anytime EXCEPT the first time.
Read anytime.
RDPK — Reduced Drive of Port K
0 = All port K output pins have full drive enabled.
1 = All port K output pins have reduced drive capability.
RDPJ — Reduced Drive of Port J
0 = All port J output pins have full drive enabled.
1 = All port J output pins have reduced drive capability.
RDPH — Reduced Drive of Port H
0 = All port H output pins have full drive enabled.
1 = All port H output pins have reduced drive capability.
RDPE — Reduced Drive of Port E
0 = All port E output pins have full drive enabled.
1 = All port E output pins have reduced drive capability.
RDPB — Reduced Drive of Port B
0 = All port B output pins have full drive enabled.
1 = All port B output pins have reduced drive capability.
RDPA — Reduced Drive of Port A
0 = All port A output pins have full drive enabled.
1 = All port A output pins have reduced drive capability.
RDRIV — Reduced Drive of I/O Lines $000D
Bit 7654321Bit 0
RDPK RDPJ RDPH RDPE 0 0 RDPB RDPA
RESET:00000000
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...