Datasheet

Enhanced Capture Timer
Timer Register Descriptions
MC68HC912DT128A — Rev 4.0 Technical Data
MOTOROLA Enhanced Capture Timer 257
Read or write anytime.
TOI — Timer Overflow Interrupt Enable
0 = Interrupt inhibited
1 = Hardware interrupt requested when TOF flag set
PUPT — Timer Port Pull-Up Resistor Enable
This enable bit controls pull-up resistors on the timer port pins when
the pins are configured as inputs.
0 = Disable pull-up resistor function
1 = Enable pull-up resistor function
RDPT — Timer Port Drive Reduction
This bit reduces the effective output driver size which can reduce
power supply current and generated noise depending upon pin
loading.
0 = Normal output drive capability
1 = Enable output drive reduction function
TCRE — Timer Counter Reset Enable
This bit allows the timer counter to be reset by a successful output
compare 7 event. This mode of operation is similar to an up-counting
modulus counter.
0 = Counter reset inhibited and counter free runs
1 = Counter reset by a successful output compare 7
If TC7 = $0000 and TCRE = 1, TCNT will stay at $0000 continuously.
If TC7 = $FFFF and TCRE = 1, TOF will never be set when TCNT is
reset from $FFFF to $0000.
PR2, PR1, PR0 — Timer Prescaler Select
These three bits specify the number of ÷2 stages that are to be
inserted between the module clock and the main timer counter.
TMSK2 — Timer Interrupt Mask 2 $008D
Bit 7 6 5 4 3 2 1 Bit 0
TOI 0 PUPT RDPT TCRE PR2 PR1 PR0
RESET: 0 0 0 0 0 0 0 0
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...