Datasheet

Inter IC Bus
Technical Data MC68HC912DT128A — Rev 4.0
304 Inter IC Bus MOTOROLA
17.4 IIC System Configuration
The IIC system uses a Serial Data line (SDA) and a Serial Clock Line
(SCL) for data transfer. All devices connected to it must have open drain
or open collector outputs. Logic “and” function is exercised on both lines
with external pull-up resistors, the value of these resistors is system
dependent.
17.5 IIC Protocol
Normally, a standard communication is composed of four parts: START
signal, slave address transmission, data transfer and STOP signal. They
are described briefly in the following sections and illustrated in Figure 17-
2.
Figure 17-2. IIC Transmission Signals
SCL
SDA
Start
Signal
Ack
Bit
12345678
MSB LSB
12345678
MSB LSB
Stop
Signal
No
SCL
SDA
1234567 8
MSB LSB
1 2 5 678
MSB LSB
Repeated
34
9 9
AD7 AD6 AD5 AD4 AD3 AD2 AD1 R/W XXX D7 D6 D5 D4 D3 D2 D1 D0
Calling Address Read/ Data Byte
AD7 AD6 AD5 AD4 AD3 AD2 AD1 R/W AD7 AD6 AD5 AD4 AD3 AD2 AD1 R/W
New Calling Address
99
XX
Ack
Bit
Write
Start
Signal
Start
Signal
Ack
Bit
Calling Address Read/
Write
Stop
Signal
No
Ack
Bit
Read/
Write
Frees
cale Semiconductor,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
nc...