Datasheet

Chapter 7 Central Processor Unit (S08CPUV2)
MC9S08AW60 Data Sheet, Rev 2
118 Freescale Semiconductor
7.5 HCS08 Instruction Set Summary
Instruction Set Summary Nomenclature
The nomenclature listed here is used in the instruction descriptions in Table 7-2.
Operators
( ) = Contents of register or memory location shown inside parentheses
← = Is loaded with (read: “gets”)
&=Boolean AND
|=Boolean OR
⊕ = Boolean exclusive-OR
× = Multiply
÷ = Divide
:=Concatenate
+=Add
–=Negate (two’s complement)
CPU registers
A=Accumulator
CCR = Condition code register
H=Index register, higher order (most significant) 8 bits
X=Index register, lower order (least significant) 8 bits
PC = Program counter
PCH = Program counter, higher order (most significant) 8 bits
PCL = Program counter, lower order (least significant) 8 bits
SP = Stack pointer
Memory and addressing
M
= A memory location or absolute data, depending on addressing mode
M:M + 0x0001= A 16-bit value in two consecutive memory locations. The higher-order (most
significant) 8 bits are located at the address of M, and the lower-order (least
significant) 8 bits are located at the next higher sequential address.
Condition code register (CCR) bits
V=Two’s complement overflow indicator, bit 7
H=Half carry, bit 4
I=Interrupt mask, bit 3
N=Negative indicator, bit 2
Z=Zero indicator, bit 1
C=Carry/borrow, bit 0 (carry out of bit 7)
CCR activity notation
–=Bit not affected