Datasheet

Appendix A Electrical Characteristics and Timing Specifications
MC9S08AW60 Data Sheet, Rev 2
Freescale Semiconductor 307
A.13 EMC Performance
Electromagnetic compatibility (EMC) performance is highly dependant on the environment in which the
MCU resides. Board design and layout, circuit topology choices, location and characteristics of external
components as well as MCU software operation all play a significant role in EMC performance. The
system designer should consult Freescale applications notes such as AN2321, AN1050, AN1263,
AN2764, and AN1259 for advice and guidance specifically targeted at optimizing EMC performance.
A.13.1 Radiated Emissions
Microcontroller radiated RF emissions are measured from 150 kHz to 1 GHz using the TEM/GTEM Cell
method in accordance with the IEC 61967-2 and SAE J1752/3 standards. The measurement is performed
with the microcontroller installed on a custom EMC evaluation board while running specialized EMC test
software. The radiated emissions from the microcontroller are measured in a TEM cell in two package
orientations (North and East). For more detailed information concerning the evaluation results, conditions
and setup, please refer to the EMC Evaluation Report for this device.
The maximum radiated RF emissions of the tested configuration in all orientations are less than or equal
to the reported emissions levels.
A.13.2 Conducted Transient Susceptibility
Microcontroller transient conducted susceptibility is measured in accordance with an internal Freescale
test method. The measurement is performed with the microcontroller installed on a custom EMC
evaluation board and running specialized EMC test software designed in compliance with the test method.
Table A-17. Radiated Emissions
Parameter Symbol Conditions f
OSC
/f
BUS
Frequency
Level
1
(Max)
1
Data based on qualification test results.
Unit
Radiated emissions,
electric field
V
RE_TEM
V
DD
= 5.5V
T
A
= +25
o
C
package type
64 QFP
4 MHz crystal
20 MHz Bus
0.15 – 50 MHz 16 dBμV
50 – 150 MHz 3
150 – 500 MHz 1
500 – 1000 MHz 0
IEC Level L —
SAE Level 2 —
32 kHz crystal
8 MHz Bus
0.15 – 50 MHz -1 dBμV
50 – 150 MHz -6
150 – 500 MHz -10
500 – 1000 MHz -10
IEC Level N —
SAE Level 1 —