Datasheet

Appendix A Electrical Characteristics
MC9S08GB60A Data Sheet, Rev. 2
268 Freescale Semiconductor
LVI adder to stop3
(LVDSE = LVDE = 1)
3 70 μA
55
70
85
2 60 μA
55
70
85
Adder to stop3 for oscillator enabled
7
(OSCSTEN =1)
35 μA
55
70
85
25 μA
55
70
85
Adder for loss-of-clock enabled 3 9 μA
55
70
85
1
Typicals are measured at 25°C. See Ta bl e A- 6 through Tabl e A - 9 for typical curves across voltage/temperature.
2
Values given here are preliminary estimates prior to completing characterization.
3
All modules except ATD active, ICG configured for FBE, and does not include any dc loads on port pins
4
Values are characterized but not tested on every part.
5
Every unit tested to this parameter. All other values in the Max column are guaranteed by characterization.
6
Most customers are expected to find that auto-wakeup from stop2 or stop3 can be used instead of the higher current wait mode.
Wait mode typical is 560 μA at 3 V and 422 μA at 2V with f
Bus
= 1 MHz.
7
Values given under the following conditions: low range operation (RANGE = 0), low power mode (HGO = 0), clock monitor
disabled (LOCD = 1).
Table A-5. Supply Current Characteristics (continued)
Parameter Symbol V
DD
(V) Typical
1
Max
2
Temp. (°C)