Datasheet

PORT_PTCPE field descriptions (continued)
Field Description
0 Pullup disabled for port C bit 0.
1 Pullup enabled for port C bit 0.
7.7.33 Port D Pullup Enable Register (PORT_PTDPE)
Address: 0h base + 30F3h offset = 30F3h
Bit 7 6 5 4 3 2 1 0
Read
PTDPE7 PTDPE6 PTDPE5 PTDPE4 PTDPE3 PTDPE2 PTDPE1 PTDPE0
Write
Reset
0 0 0 0 0 0 0 0
PORT_PTDPE field descriptions
Field Description
7
PTDPE7
Pull Enable for Port D Bit 7
This control bit determines if the internal pullup device is enabled for the associated PTD pin. For port D
pins that are configured as outputs or Hi-Z, these bits have no effect.
0 Pullup disabled for port D bit 7.
1 Pullup enabled for port D bit 7.
6
PTDPE6
Pull Enable for Port D Bit 6
This control bit determines if the internal pullup device is enabled for the associated PTD pin. For port D
pins that are configured as outputs or Hi-Z, these bits have no effect.
0 Pullup disabled for port D bit 6.
1 Pullup enabled for port D bit 6.
5
PTDPE5
Pull Enable for Port D Bit 5
This control bit determines if the internal pullup device is enabled for the associated PTD pin. For port D
pins that are configured as outputs or Hi-Z, these bits have no effect.
0 Pullup disabled for port D bit 5.
1 Pullup enabled for port D bit 5.
4
PTDPE4
Pull Enable for Port D Bit 4
This control bit determines if the internal pullup device is enabled for the associated PTD pin. For port D
pins that are configured as outputs or Hi-Z, these bits have no effect.
0 Pullup disabled for port D bit 4.
1 Pullup enabled for port D bit 4.
3
PTDPE3
Pull Enable for Port D Bit 3
This control bit determines if the internal pullup device is enabled for the associated PTD pin. For port D
pins that are configured as outputs or Hi-Z, these bits have no effect.
0 Pullup disabled for port D bit 3.
1 Pullup enabled for port D bit 3.
Table continues on the next page...
Port data registers
MC9S08PA60 Reference Manual, Rev. 1, 9/2012
188 Freescale Semiconductor, Inc.