Datasheet

PORT_PTDPE field descriptions (continued)
Field Description
2
PTDPE2
Pull Enable for Port D Bit 2
This control bit determines if the internal pullup device is enabled for the associated PTD pin. For port D
pins that are configured as outputs or Hi-Z, these bits have no effect.
0 Pullup disabled for port D bit 2.
1 Pullup enabled for port D bit 2.
1
PTDPE1
Pull Enable for Port D Bit 1
This control bit determines if the internal pullup device is enabled for the associated PTD pin. For port D
pins that are configured as outputs or Hi-Z, these bits have no effect.
0 Pullup disabled for port D bit 1.
1 Pullup enabled for port D bit 1.
0
PTDPE0
Pull Enable for Port D Bit 0
This control bit determines if the internal pullup device is enabled for the associated PTD pin. For port D
pins that are configured as outputs or Hi-Z, these bits have no effect.
0 Pullup disabled for port D bit 0.
1 Pullup enabled for port D bit 0.
7.7.34 Port E Pullup Enable Register (PORT_PTEPE)
Address: 0h base + 30F4h offset = 30F4h
Bit 7 6 5 4 3 2 1 0
Read
PTEPE7 PTEPE6 PTEPE5 PTEPE4 PTEPE3 PTEPE2 PTEPE1 PTEPE0
Write
Reset
0 0 0 0 0 0 0 0
PORT_PTEPE field descriptions
Field Description
7
PTEPE7
Pull Enable for Port E Bit 7
This control bit determines if the internal pullup device is enabled for the associated PTE pin. For port E
pins that are configured as outputs or Hi-Z, these bits have no effect.
0 Pullup disabled for port E bit 7.
1 Pullup enabled for port E bit 7.
6
PTEPE6
Pull Enable for Port E Bit 6
This control bit determines if the internal pullup device is enabled for the associated PTE pin. For port E
pins that are configured as outputs or Hi-Z, these bits have no effect.
0 Pullup disabled for port E bit 6.
1 Pullup enabled for port E bit 6.
5
PTEPE5
Pull Enable for Port E Bit 5
Table continues on the next page...
Chapter 7 Parallel input/output
MC9S08PA60 Reference Manual, Rev. 1, 9/2012
Freescale Semiconductor, Inc. 189