Datasheet

12.4.11.8 Summary of PWM synchronization
The following table shows the summary of PWM synchronization.
Table 12-246. Summary of PWM synchronization
Register or bit
PWMSYN
C
REINIT
SYNCH
OM
CNTMA
X
CNTMI
N
SYNCE
N
Description
CNTINH:L X X X X X X Changes take effect after the
second byte is written.
Effect is seen after the next TOF or
PWM synchronization.
MODH:L 0 0 X 1 0 X MODH:L are updated with their write
buffer contents when the counter
reaches its maximum value after the
enabled hardware or software
trigger has occurred.
0 0 X 0 1 X MODH:L are updated with their write
buffer contents when the counter
reaches its minimum value after the
enabled hardware or software
trigger has occurred.
0 1 X X X X MODH:L are updated with their write
buffer contents when the enabled
hardware or software trigger occurs.
1 X X 1 0 X MODH:L are updated with their write
buffer contents when the counter
reaches its maximum value after the
enabled software trigger has
occurred.
1 X X 0 1 X MODH:L are updated with their write
buffer contents when the counter
reaches its minimum value after the
enabled software trigger has
occurred.
Table continues on the next page...
Chapter 12 FlexTimer Module (FTM)
MC9S08PA60 Reference Manual, Rev. 1, 9/2012
Freescale Semiconductor, Inc. 357