Datasheet

WDOG_TOVALL field descriptions
Field Description
7–0
TOVALLOW
Low byte of the timeout value
22.2.7 Watchdog Window Register: High (WDOG_WINH)
This section describes the watchdog window registers: high (WINH) and low (WINL)
combined. When window mode is enabled (WDOG_CS2[WIN] bit is set),
WDOG_WINH:L determines the earliest time that a refresh sequence is considered valid.
See the "Watchdog refresh mechanism" section.
WDOG_WINH:L must be less than WDOG_TOVALH:L.
Address: 3030h base + 6h offset = 3036h
Bit 7 6 5 4 3 2 1 0
Read
WINHIGH
Write
Reset
0 0 0 0 0 0 0 0
WDOG_WINH field descriptions
Field Description
7–0
WINHIGH
High byte of Watchdog Window
22.2.8 Watchdog Window Register: Low (WDOG_WINL)
See the description of the WDOG_WINH register.
Address: 3030h base + 7h offset = 3037h
Bit 7 6 5 4 3 2 1 0
Read
WINLOW
Write
Reset
0 0 0 0 0 0 0 0
WDOG_WINL field descriptions
Field Description
7–0
WINLOW
Low byte of Watchdog Window
Memory map and register definition
MC9S08PA60 Reference Manual, Rev. 1, 9/2012
582 Freescale Semiconductor, Inc.