Datasheet

MC9S08EL32 Series and MC9S08SL16 Series Data Sheet, Rev. 3
Freescale Semiconductor 129
Chapter 9
5-V Analog Comparator (S08ACMPV2)
9.1 Introduction
The analog comparator module (ACMP) provides a circuit for comparing two analog input voltages or for
comparing one analog input voltage to an internal reference voltage. The comparator circuit is designed to
operate across the full range of the supply voltage (rail-to-rail operation).
All MC9S08EL32 Series and MC9S08SL16 Series MCUs contain at least one ACMP. MC9S08EL32 and
MC9S08EL16 contain two ACMPs in the 28-pin package. See Table 9-1.
t
NOTE
The MC9S08EL32 Series and MC9S08SL16 Series Family of devices
operates at a higher voltage range (2.7 V to 5.5 V) and does not include
stop1 mode.
9.1.1 ACMPx Configuration Information
When using the bandgap reference voltage for input to ACMPx+, the user must enable the bandgap buffer
by setting BGBE =1 in SPMSC1 see Section 5.7.6, “System Power Management Status and Control 1
Register (SPMSC1)”. For value of bandgap voltage reference see Section A.6, “DC Characteristics”.
9.1.2 ACMP1/TPM1 Configuration Information
The ACMP1 module can be configured to connect the output of the analog comparator to TPM1 input
capture channel 0 by setting ACIC in SOPT2. With ACIC set, the TPM1CH0 pin is not available externally
regardless of the configuration of the TPM1 module for channel 0.
Table 9-1. MC9S08EL32 Series and MC9S08SL16 Series Features by MCU and Package
Feature 9S08EL32 9S08EL16 9S08SL16 9S08SL8
Pin quantity 2820282028202820
Package type TSSOP TSSOP TSSOP TSSOP TSSOP TSSOP TSSOP TSSOP
ACMP1 yes yes
ACMP2 yes no yes no no