Datasheet

Chapter 6 Analog-to-Digital Converter (ATD10B16CV2)
MC9S12E128 Data Sheet, Rev. 1.07
Freescale Semiconductor 207
6.2 External Signal Description
This section lists all inputs to the ATD10B16C block.
6.2.1 AN15/ETRIG — Analog Input Channel 15 / External trigger Pin
This pin serves as the analog input channel 15. It can also be configured as general-purpose digital input
and/or external trigger for the ATD conversion.
6.2.2 ANx (x = 14, 13, 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0) — Analog Input
Channel x Pins
This pin serves as the analog input channel x. It can also be configured as general-purpose digital input .
6.2.3 V
RH
,V
RL
— High Reference Voltage Pin, Low Reference Voltage Pin
V
RH
is the high reference voltage, V
RL
is the low reference voltage for ATD conversion.
6.2.4 V
DDA
, V
SSA
— Analog Circuitry Power Supply Pins
These pins are the power supplies for the analog circuitry of the ATD10B16CV2 block.
6.3 Memory Map and Register Definition
This section provides a detailed description of all registers accessible in the ATD10B16C.
6.3.1 Module Memory Map
Table 6-1 gives an overview of all ATD10B16C registers