Datasheet

Chapter 11 Pulse Width Modulator with Fault Protection (PMF15B6CV2)

MC9S12E128 Data Sheet, Rev. 1.07

Freescale Semiconductor 331

EDGEA

Edge-Aligned or Center-Aligned PWM for Pair A — This bit determines whether PWM0 and PWM1 channels

will use edge-aligned or center-aligned waveforms. It determines waveforms for Pair B and Pair C if the MTG bit

is cleared. This bit cannot be modiﬁed after the WP bit is set.

0 PWM0 and PWM1 are center-aligned PWMs

1 PWM0 and PWM1 are edge-aligned PWMs

INDEPC

Independent or Complimentary Operation for Pair C — This bit determines if the PWM channels 4 and 5 will

be independent PWMs or complementary PWMs. This bit cannot be modiﬁed after the WP bit is set.

0 PWM4 and PWM5 are complementary PWM pair

1 PWM4 and PWM5 are independent PWMs

INDEPB

Independent or Complimentary Operation for Pair B — This bit determines if the PWM channels 2 and 3 will

be independent PWMs or complementary PWMs. This bit cannot be modiﬁed after the WP bit is set.

0 PWM2 and PWM3 are complementary PWM pair

1 PWM2 and PWM3 are independent PWMs

INDEPA

Independent or Complimentary Operation for Pair A — This bit determines if the PWM channels 0 and 1 will

be independent PWMs or complementary PWMs. This bit cannot be modiﬁed after the WP bit is set.

0 PWM0 and PWM1 are complementary PWM pair

1 PWM0 and PWM1 are independent PWMs

Table 11-2. PMFCFG0 Field Descriptions (continued)

Field Description