Datasheet

Appendix A Electrical Characteristics
MC9S12XE-Family Reference Manual Rev. 1.25
1204 Freescale Semiconductor
maximum-rated voltages to this high-impedance circuit. Reliability of operation is enhanced if unused
inputs are tied to an appropriate logic voltage level (e.g., either V
SS35
or V
DD35
).
A.1.6 ESD Protection and Latch-up Immunity
All ESD testing is in conformity with CDF-AEC-Q100 stress test qualification for automotive grade
integrated circuits. During the device qualification ESD stresses were performed for the Human Body
Model (HBM) and the Charge Device Model.
A device will be defined as a failure if after exposure to ESD pulses the device no longer meets the device
specification. Complete DC parametric and functional testing is performed per the applicable device
Table A-1. Absolute Maximum Ratings
(1)
1. Beyond absolute maximum ratings device might be damaged.
Num Rating Symbol Min Max Unit
1 I/O, regulator and analog supply voltage V
DD35
–0.3 6.0 V
2 Digital logic supply voltage
(2)
2. The device contains an internal voltage regulator to generate the logic and PLL supply out of the I/O supply. The absolute
maximum ratings apply when the device is powered from an external source.
V
DD
–0.3 2.16 V
3 PLL supply voltage
2
V
DDPLL
–0.3 2.16 V
4 NVM supply voltage
2
V
DDF
–0.3 3.6 V
5 Voltage difference V
DDX
to V
DDA
∆
VDDX
–6.0 0.3 V
6 Voltage difference V
SSX
to V
SSA
∆
VSSX
–0.3 0.3 V
7 Digital I/O input voltage V
IN
–0.3 6.0 V
8 Analog reference V
RH,
V
RL
–0.3 6.0 V
9 EXTAL, XTAL V
ILV
–0.3 2.16 V
10 TEST input V
TEST
–0.3 10.0 V
11 Instantaneous maximum current
Single pin limit for all digital I/O pins
(3)
3. All digital I/O pins are internally clamped to V
SSX
and V
DDX
, or V
SSA
and V
DDA
.
I
D
–25 +25 mA
12 Instantaneous maximum current
Single pin limit for EXTAL, XTAL
(4)
4. Those pins are internally clamped to V
SSPLL
and V
DDPLL
.
I
DL
–25 +25 mA
13 Instantaneous maximum current
Single pin limit for TEST
(5)
5. This pin is clamped low to V
SSPLL
, but not clamped high. This pin must be tied low in applications.
I
DT
–0.25 0 mA
14 Maximum current
Single pin limit for power supply pins
I
DV
–100 +100 mA
15 Storage temperature range T
stg
–65 155 °C