Datasheet

Chapter 16 Freescale’s Scalable Controller Area Network (S12MSCANV3)
MC9S12XE-Family Reference Manual Rev. 1.25
Freescale Semiconductor 623
16.3.2.10 MSCAN Transmitter Message Abort Acknowledge Register (CANTAAK)
The CANTAAK register indicates the successful abort of a queued message, if requested by the
appropriate bits in the CANTARQ register.
NOTE
The CANTAAK register is held in the reset state when the initialization
mode is active (INITRQ = 1 and INITAK = 1).
16.3.2.11 MSCAN Transmit Buffer Selection Register (CANTBSEL)
The CANTBSEL register allows the selection of the actual transmit message buffer, which then will be
accessible in the CANTXFG register space.
Module Base + 0x0009 Access: User read/write
(1)
1. Read: Anytime
Write: Unimplemented
76543210
R00000ABTAK2 ABTAK1 ABTAK0
W
Reset: 00000000
= Unimplemented
Figure 16-13. MSCAN Transmitter Message Abort Acknowledge Register (CANTAAK)
Table 16-16. CANTAAK Register Field Descriptions
Field Description
2-0
ABTAK[2:0]
Abort Acknowledge — This flag acknowledges that a message was aborted due to a pending abort request
from the CPU. After a particular message buffer is flagged empty, this flag can be used by the application
software to identify whether the message was aborted successfully or was sent anyway. The ABTAKx flag is
cleared whenever the corresponding TXE flag is cleared.
0 The message was not aborted.
1 The message was aborted.
Module Base + 0x000A Access: User read/write
(1)
1. Read: Find the lowest ordered bit set to 1, all other bits will be read as 0
Write: Anytime when not in initialization mode
76543210
R00000
TX2 TX1 TX0
W
Reset: 00000000
= Unimplemented
Figure 16-14. MSCAN Transmit Buffer Selection Register (CANTBSEL)