Datasheet

128 KByte Flash Module (S12XFTMR128K1V1)
S12XS Family Reference Manual, Rev. 1.13
588 Freescale Semiconductor
19.4.1.3 Valid Flash Module Commands
19.4.1.4 P-Flash Commands
Table 19-29 summarizes the valid P-Flash commands along with the effects of the commands on the
P-Flash block and other resources within the Flash module.
Table 19-28. Flash Commands by Mode
FCMD Command
Unsecured Secured
NS
1
1
Unsecured Normal Single Chip mode.
NX
2
2
Unsecured Normal Expanded mode.
SS
3
3
Unsecured Special Single Chip mode.
ST
4
4
Unsecured Special Mode.
NS
5
5
Secured Normal Single Chip mode.
NX
6
6
Secured Normal Expanded mode.
SS
7
7
Secured Special Single Chip mode.
ST
8
8
Secured Special Mode.
0x01 Erase Verify All Blocks ∗∗∗∗∗∗∗∗
0x02 Erase Verify Block ∗∗∗∗∗∗∗∗
0x03 Erase Verify P-Flash Section ∗∗∗∗∗
0x04 Read Once ∗∗∗∗∗
0x06 Program P-Flash ∗∗∗∗∗
0x07 Program Once ∗∗∗∗∗
0x08 Erase All Blocks ∗∗ ∗∗
0x09 Erase Flash Block ∗∗∗∗∗
0x0A Erase P-Flash Sector ∗∗∗∗∗
0x0B Unsecure Flash ∗∗ ∗∗
0x0C Verify Backdoor Access Key ∗∗
0x0D Set User Margin Level ∗∗∗∗∗
0x0E Set Field Margin Level ∗∗
0x10 Erase Verify D-Flash Section ∗∗∗∗∗
0x11 Program D-Flash ∗∗∗∗∗
0x12 Erase D-Flash Sector ∗∗∗∗∗