Datasheet

Chapter 5. Debug Support 5-51
Debug C Definition of PSTDDATA Outputs
divu.w <ea>y,Dx PSTDDATA = 1, {9, source operand}
eor.l Dy,<ea>x PSTDDATA = 1, {B, source}, {B, destination}
eori.l #imm,Dx PSTDDATA = 1
ext.w Dx PSTDDATA = 1
ext.l Dx PSTDDATA = 1
extb.l Dx PSTDDATA = 1
jmp <ea>x PSTDDATA = 5, {[9AB], target address}
1
jsr <ea>x PSTDDATA = 5, {[9AB], target address}, {B, destination operand}
1
lea <ea>y,Ax PSTDDATA = 1
link.w Ay,#imm PSTDDATA = 1, {B, destination operand}
lsl.l {Dy,#imm},Dx PSTDDATA = 1
lsr.l {Dy,#imm},Dx PSTDDATA = 1
mac.l Ry,Rx PSTDDATA = 1
mac.l Ry,Rx,ea,Rw PSTDDATA = 1, {B, source operand}
mac.w Ry,Rx PSTDDATA = 1
mac.w Ry,Rx,ea,Rw PSTDDATA = 1, {B, source operand}
mov3q.l #imm,<ea>x PSTDDATA = 1, {B, destination operand}
move.b <ea>y,<ea>x PSTDDATA = 1, {8, source}, {8, destination}
move.w <ea>y,<ea>x PSTDDATA = 1, {9, source}, {9, destination}
move.l <ea>y,<ea>x PSTDDATA = 1, {B, source}, {B, destination}
move.l <ea>y,ACC PSTDDATA = 1
move.l <ea>y,MACSR PSTDDATA = 1
move.l <ea>y,MASK PSTDDATA = 1
move.l ACC,Rx PSTDDATA = 1
move.l MACSR,CCR PSTDDATA = 1
move.l MACSR,Rx PSTDDATA = 1
move.l MASK,Rx PSTDDATA = 1
move.w CCR,Dx PSTDDATA = 1
move.w {Dy,#imm},CCR PSTDDATA = 1
movem.l <ea>y,#list PSTDDATA = 1, {B, source},...
2
movem.l #list,<ea>x PSTDDATA = 1, {B, destination},...
2
moveq #imm,Dx PSTDDATA = 1
msac.l Ry,Rx PSTDDATA = 1
msac.l Ry,Rx,ea,Rw PSTDDATA = 1, {B, source operand}
msac.w Ry,Rx PSTDDATA = 1
msac.w Ry,Rx,ea,Rw PSTDDATA = 1, {B, source operand}
Table 5-27. PSTDDATA Specification for User-Mode Instructions (Continued)
Instruction Syntax PSTDDATA