Datasheet

Figure 2. Run mode supply current vs. core frequency
5.2.6 EMC radiated emissions operating behaviors
Table 7. EMC radiated emissions operating behaviors as measured on 144LQFP and
144MAPBGA packages
Symbol Description Frequency
band (MHz)
144LQFP 144MAPBGA Unit Notes
V
RE1
Radiated emissions voltage, band 1 0.15–50 23 12 dBμV 1 , 2
V
RE2
Radiated emissions voltage, band 2 50–150 27 24 dBμV
V
RE3
Radiated emissions voltage, band 3 150–500 28 27 dBμV
V
RE4
Radiated emissions voltage, band 4 500–1000 14 11 dBμV
V
RE_IEC
IEC level 0.15–1000 K K — 2, 3
1. Determined according to IEC Standard 61967-1, Integrated Circuits - Measurement of Electromagnetic Emissions, 150
kHz to 1 GHz Part 1: General Conditions and Definitions and IEC Standard 61967-2, Integrated Circuits - Measurement of
Electromagnetic Emissions, 150 kHz to 1 GHz Part 2: Measurement of Radiated Emissions—TEM Cell and Wideband
TEM Cell Method. Measurements were made while the microcontroller was running basic application code. The reported
emission level is the value of the maximum measured emission, rounded up to the next whole number, from among the
measured orientations in each frequency range.
General
K10 Sub-Family Data Sheet Data Sheet, Rev. 7, 02/2013.
18 Freescale Semiconductor, Inc.