Information

SPIx_PUSHR field descriptions (continued)
Field Description
110 Reserved
111 Reserved
27
EOQ
End Of Queue
Host software uses this bit to signal to the DSPI that the current SPI transfer is the last in a queue. At the
end of the transfer, the EOQF bit in the SR is set.
0 The SPI data is not the last data to transfer.
1 The SPI data is the last data to transfer.
26
CTCNT
Clear Transfer Counter.
Clears the SPI_TCNT field in the TCR register. The SPI_TCNT field is cleared before the DSPI starts
transmitting the current SPI frame.
0 Do not clear the TCR[SPI_TCNT] field.
1 Clear the TCR[SPI_TCNT] field.
25–24
Reserved
This read-only field is reserved and always has the value zero.
23–22
Reserved
This read-only field is reserved and always has the value zero.
21–16
PCS[5:0]
Select which PCS signals are to be asserted for the transfer. Refer to the chip configuration chapter for
the number of PCS signals used in this MCU.
0 Negate the PCS[x] signal.
1 Assert the PCS[x] signal.
15–0
TXDATA
Transmit Data
Holds SPI data to be transferred according to the associated SPI command.
Memory Map/Register Definition
K10 Sub-Family Reference Manual, Rev. 6, Nov 2011
1186 Freescale Semiconductor, Inc.