Information

3.8.6 RTC configuration
This section summarizes how the module has been configured in the chip. For a
comprehensive description of the module itself, see the module’s dedicated chapter.
Signal multiplexing
Register
access
Peripheral
bridge
Module signals
Real-time clock
Figure 3-48. RTC configuration
Table 3-59. Reference links to related information
Topic Related module Reference
Full description RTC RTC
System memory map System memory map
Clocking Clock Distribution
Power management Power management
3.8.6.1 RTC_CLKOUT signal
When the RTC is enabled and the port control module selects the RTC_CLKOUT
function, the RTC_CLKOUT signal is fixed to a 1 Hz output.
3.8.6.2 RTC_WAKEUP signal
The RTC_WAKEUP pin is not supported on this device.
3.8.6.3 RTC seconds interrupt
The RTC seconds interrupt is not supported on this device.
Chapter 3 Chip Configuration
K10 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc. 131