Information

48.1.2.1 Run mode
In run mode, the GPIO operates normally.
48.1.2.2 Wait mode
In wait mode, the GPIO operates normally.
48.1.2.3 Stop mode
The GPIO is disabled in stop mode, although the pins retain their state.
48.1.2.4 Debug mode
In debug mode, the GPIO operates normally.
48.1.3 GPIO signal descriptions
Table 48-1. GPIO signal descriptions
Signal Description I/O
PORTA[31:0] General purpose input/output I/O
PORTB[31:0] General purpose input/output I/O
PORTC[31:0] General purpose input/output I/O
PORTD[31:0] General purpose input/output I/O
PORTE[31:0] General purpose input/output I/O
NOTE
Not all pins within each port are implemented on each device.
Refer to the Signal Multiplexing chapter for the number of
GPIO ports available in the device.
Introduction
K10 Sub-Family Reference Manual, Rev. 6, Nov 2011
1522 Freescale Semiconductor, Inc.