Information

Table 28-1. EEPROM Data Set Size (continued)
1 1 EEESPLIT EEESIZE
= Unimplemented or Reserved
Table 28-2. EEPROM Data Set Size Field Description
Field Description
7-6
Reserved
This read-only bitfield is reserved and must always be written as one.
5-4
EEESPLIT
EEPROM Split Factor — Determines the relative sizes of the two EEPROM subsystems.
‘00’ = Subsystem A: EEESIZE*1/8, subsystem B: EEESIZE*7/8
‘01’ = Subsystem A: EEESIZE*1/4, subsystem B: EEESIZE*3/4
‘10’ = Subsystem A: EEESIZE*1/2, subsystem B: EEESIZE*1/2
‘11’ = Subsystem A: EEESIZE*1/2, subsystem B: EEESIZE*1/2
3-0
EEESIZE
EEPROM Size — Encoding of the total available FlexRAM for EEPROM use.
NOTE: EEESIZE must be 0 bytes (1111b) when the FlexNVM partition code (FlexNVM Partition
Code) is set to 'No EEPROM'.
'0000' = Reserved
'0001' = Reserved
'0010' = 4,096 Bytes
'0011' = 2,048 Bytes
'0100' = 1,024 Bytes
'0101' = 512 Bytes
'0110' = 256 Bytes
'0111' = 128 Bytes
'1000' = 64 Bytes
'1001' = 32 Bytes
'1010' = Reserved
'1011' = Reserved
'1100' = Reserved
'1101' = Reserved
'1110' = Reserved
'1111' = 0 Bytes
28.3.3.2 FlexNVM Partition Code
The FlexNVM Partition Code byte in the data flash IFR supplies a code which specifies
how to split the FlexNVM block between data flash memory and EEPROM backup
memory supporting EEPROM functions. To program the DEPART value, see the
Program Partition command described in Program Partition Command.
Memory Map and Registers
K10 Sub-Family Reference Manual, Rev. 6, Nov 2011
612 Freescale Semiconductor, Inc.