Information

Table 3-4. Interrupt vector assignments (continued)
Address Vector IRQ
1
NVIC
non-IPR
register
number
2
NVIC
IPR
register
number
3
Source module Source description
0x0000_0054 21 5 0 1 DMA DMA channel 5 transfer complete
0x0000_0058 22 6 0 1 DMA DMA channel 6 transfer complete
0x0000_005C 23 7 0 1 DMA DMA channel 7 transfer complete
0x0000_0060 24 8 0 2 DMA DMA channel 8 transfer complete
0x0000_0064 25 9 0 2 DMA DMA channel 9 transfer complete
.
0x0000_0068 26 10 0 2 DMA DMA channel 10 transfer complete
0x0000_006C 27 11 0 2 DMA DMA channel 11 transfer complete
0x0000_0070 28 12 0 3 DMA DMA channel 12 transfer complete
0x0000_0074 29 13 0 3 DMA DMA channel 13 transfer complete
0x0000_0078 30 14 0 3 DMA DMA channel 14 transfer complete
0x0000_007C 31 15 0 3 DMA DMA channel 15 transfer complete
0x0000_0080 32 16 0 4 DMA DMA error interrupt channels 0-15
0x0000_0084 33 17 0 4 MCM Normal interrupt
0x0000_0088 34 18 0 4 Flash memory Command complete
0x0000_008C 35 19 0 4 Flash memory Read collision
0x0000_0090 36 20 0 5 Mode Controller Low-voltage detect, low-voltage warning
0x0000_0094 37 21 0 5 LLWU Low Leakage Wakeup
NOTE: The LLWU interrupt must not
be masked by the interrupt
controller to avoid a scenario
where the system does not fully
exit stop mode on an LLS
recovery.
0x0000_0098 38 22 0 5 WDOG Watchdog interrupt
0x0000_009C 39 23 0 5 — —
0x0000_00A0 40 24 0 6 I
2
C0 —
0x0000_00A4 41 25 0 6 I
2
C1 —
0x0000_00A8 42 26 0 6 SPI0 Single interrupt vector for all sources
0x0000_00AC 43 27 0 6 SPI1 Single interrupt vector for all sources
0x0000_00B0 44 28 0 7 SPI2 Single interrupt vector for all sources
0x0000_00B4 45 29 0 7 CAN0 OR'ed Message buffer (0-15)
0x0000_00B8 46 30 0 7 CAN0 Bus Off
0x0000_00BC 47 31 0 7 CAN0 Error
0x0000_00C0 48 32 1 8 CAN0 Transmit Warning
Table continues on the next page...
Core modules
K10 Sub-Family Reference Manual, Rev. 6, Nov 2011
68 Freescale Semiconductor, Inc.