Information
• For devices that contain FlexNVM: 1 block of program flash consisting of 2 KB
sectors
• For devices that contain FlexNVM: 1 block of FlexNVM consisting of 2 KB sectors
• For devices that contain FlexNVM: 1 block of FlexRAM
The amounts of flash memory for the devices covered in this document are:
Device Program
flash (KB)
Block 0 (P-
Flash)
address
range
1
FlexNVM
(KB)
Block 1
(FlexNVM/ P-
Flash)
address
range
1
FlexRAM
(KB)
FlexRAM
address
range
MK10DX128ZV
LQ10
128 0x0000_0000 –
0x0001_FFFF
128 0x1000_0000 –
0x1001_FFFF
4 0x1400_0000 –
0x1400_0FFF
MK10DX128ZV
MD10
128 0x0000_0000 –
0x0001_FFFF
128 0x1000_0000 –
0x1001_FFFF
4 0x1400_0000 –
0x1400_0FFF
MK10DX256ZV
LQ10
256 0x0000_0000 –
0x0003_FFFF
256 0x1000_0000 –
0x1003_FFFF
4 0x1400_0000 –
0x1400_0FFF
MK10DX256ZV
MD10
256 0x0000_0000 –
0x0003_FFFF
256 0x1000_0000 –
0x1003_FFFF
4 0x1400_0000 –
0x1400_0FFF
MK10DN512ZV
LQ10
512 0x0000_0000 –
0x0003_FFFF
— 0x0004_0000 –
0x0007_FFFF
— N/A
MK10DN512ZV
MD10
512 0x0000_0000 –
0x0003_FFFF
— 0x0004_0000 –
0x0007_FFFF
— N/A
1. For program flash only devices: The addresses shown assume program flash swap is disabled (default configuration).
3.5.1.3 Flash Memory Size Considerations
Since this document covers devices that contain program flash only and devices that
contain program flash and FlexNVM, there are some items to consider when reading the
flash memory chapter.
• The flash memory chapter shows a mixture of information depending on the device
you are using.
• For the program flash only devices:
• Two program flash blocks are supported: program flash 1 and program flash 2.
The two blocks are contiguous in the system memory map.
• The program flash blocks support a swap feature in which the starting address of
the program flash blocks can be swapped.
• The FlexRAM is not available as EEPROM or traditional RAM. Its space is only
used for programming acceleration through the Program Section command.
• For the devices containing program flash and FlexNVM:
• Since there is only one program flash block, the program flash swap feature is
not available.
Chapter 3 Chip Configuration
K10 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc. 95