Information

The second set has the FTM specific registers. Any second set registers, or bits within
these registers, that are used by an unavailable function in the FTM configuration remain
in the memory map and in the reset value, so they have no active function.
Note
Do not write to the FTM specific registers (second set registers)
when FTMEN = 0.
35.3.2 Register descriptions
Accesses to reserved addresses result in transfer errors. Registers for absent channels are
considered reserved.
FTM memory map
Absolute
address
(hex)
Register name
Width
(in bits)
Access Reset value
Section/
page
4003_8000 Status And Control (FTM0_SC) 32 R/W 0000_0000h
35.3.3/
695
4003_8004 Counter (FTM0_CNT) 32 R/W 0000_0000h
35.3.4/
696
4003_8008 Modulo (FTM0_MOD) 32 R/W 0000_0000h
35.3.5/
697
4003_800C Channel (n) Status And Control (FTM0_C0SC) 32 R/W 0000_0000h
35.3.6/
698
4003_8010 Channel (n) Value (FTM0_C0V) 32 R/W 0000_0000h
35.3.7/
701
4003_8014 Channel (n) Status And Control (FTM0_C1SC) 32 R/W 0000_0000h
35.3.6/
698
4003_8018 Channel (n) Value (FTM0_C1V) 32 R/W 0000_0000h
35.3.7/
701
4003_801C Channel (n) Status And Control (FTM0_C2SC) 32 R/W 0000_0000h
35.3.6/
698
4003_8020 Channel (n) Value (FTM0_C2V) 32 R/W 0000_0000h
35.3.7/
701
4003_8024 Channel (n) Status And Control (FTM0_C3SC) 32 R/W 0000_0000h
35.3.6/
698
4003_8028 Channel (n) Value (FTM0_C3V) 32 R/W 0000_0000h
35.3.7/
701
4003_802C Channel (n) Status And Control (FTM0_C4SC) 32 R/W 0000_0000h
35.3.6/
698
Table continues on the next page...
Chapter 35 FlexTimer Module (FTM)
K20 Sub-Family Reference Manual, Rev. 2, Feb 2012
Freescale Semiconductor, Inc. 691