Information

Table 2-10. HMI modules
Module Description
General purpose input/output (GPIO) All general purpose input or output (GPIO) pins are capable of interrupt and DMA
request generation. All GPIO pins have 5 V tolerance.
Capacitive touch sense input (TSI) Contains up to 16 channel inputs for capacitive touch sensing applications.
Operation is available in low-power modes via interrupts.
2.5 Orderable part numbers
The following table summarizes the part numbers of the devices covered by this
document.
Table 2-11. Orderable part numbers summary
Freescale part number CPU
frequenc
y
Pin
count
Package Total
flash
memory
Program
flash
EEPROM SRAM GPIO
MK20DN32VLH5 50 MHz 64 LQFP 32 KB 32 KB — 8 KB 40
MK20DX32VLH5 50 MHz 64 LQFP 64 KB 32 KB 2 KB 8 KB 40
MK20DN64VLH5 50 MHz 64 LQFP 64 KB 64 KB — 16 KB 40
MK20DX64VLH5 50 MHz 64 LQFP 96 KB 64 KB 2 KB 16 KB 40
MK20DN128VLH5 50 MHz 64 LQFP 128 KB 128 KB — 16 KB 40
MK20DX128VLH5 50 MHz 64 LQFP 160 KB 128 KB 2 KB 16 KB 40
MK20DN32VMP5 50 MHz 64 LQFN 32 KB 32 KB — 8 KB 40
MK20DX32VMP5 50 MHz 64 LQFN 64 KB 32 KB 2 KB 8 KB 40
MK20DN64VMP5 50 MHz 64 LQFN 64 KB 64 KB — 16 KB 40
MK20DX64VMP5 50 MHz 64 LQFN 96 KB 64 KB 2 KB 16 KB 40
MK20DN128VMP5 50 MHz 64 LQFN 128 KB 128 KB — 16 KB 40
MK20DX128VMP5 50 MHz 64 LQFN 160 KB 128 KB 2 KB 16 KB 40
Chapter 2 Introduction
K20 Sub-Family Reference Manual, Rev. 2, Feb 2012
Freescale Semiconductor, Inc. 57
BGA
BGA
BGA
BGA
BGA
BGA