Information

35.3.12 Initial State For Channels Output (FTMx_OUTINIT)
Addresses: FTM0_OUTINIT is 4003_8000h base + 5Ch offset = 4003_805Ch
FTM1_OUTINIT is 4003_9000h base + 5Ch offset = 4003_905Ch
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0
CH7OI CH6OI CH5OI CH4OI CH3OI CH2OI CH1OI CH0OI
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
FTMx_OUTINIT field descriptions
Field Description
31–8
Reserved
This read-only field is reserved and always has the value zero.
7
CH7OI
Channel 7 Output Initialization Value
Selects the value that is forced into the channel output when the initialization occurs.
0 The initialization value is 0.
1 The initialization value is 1.
6
CH6OI
Channel 6 Output Initialization Value
Selects the value that is forced into the channel output when the initialization occurs.
0 The initialization value is 0.
1 The initialization value is 1.
5
CH5OI
Channel 5 Output Initialization Value
Selects the value that is forced into the channel output when the initialization occurs.
0 The initialization value is 0.
1 The initialization value is 1.
4
CH4OI
Channel 4 Output Initialization Value
Selects the value that is forced into the channel output when the initialization occurs.
0 The initialization value is 0.
1 The initialization value is 1.
3
CH3OI
Channel 3 Output Initialization Value
Selects the value that is forced into the channel output when the initialization occurs.
0 The initialization value is 0.
1 The initialization value is 1.
2
CH2OI
Channel 2 Output Initialization Value
Selects the value that is forced into the channel output when the initialization occurs.
Table continues on the next page...
Chapter 35 FlexTimer Module (FTM)
K20 Sub-Family Reference Manual, Rev. 2, Feb 2012
Freescale Semiconductor, Inc. 711