Information

LPTMRx_PSR field descriptions (continued)
Field Description
2
PBYP
Prescaler Bypass
When PBYP is set, the selected prescaler clock in Time Counter mode or selected input source in Pulse
Counter mode directly clocks the CNR. When PBYP is clear, the CNR is clocked by the output of the
prescaler/glitch filter. PBYP must be altered only when the LPTMR is disabled.
0 Prescaler/glitch filter is enabled.
1 Prescaler/glitch filter is bypassed.
1–0
PCS
Prescaler Clock Select
Selects the clock to be used by the LPTMR prescaler/glitch filter. PCS must be altered only when the
LPTMR is disabled. The clock connections vary by device.
NOTE: See the chip configuration details for information on the connections to these inputs.
00 Prescaler/glitch filter clock 0 selected.
01 Prescaler/glitch filter clock 1 selected.
10 Prescaler/glitch filter clock 2 selected.
11 Prescaler/glitch filter clock 3 selected.
37.3.3 Low Power Timer Compare Register (LPTMRx_CMR)
Addresses: LPTMR0_CMR is 4004_0000h base + 8h offset = 4004_0008h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0
COMPARE
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
LPTMRx_CMR field descriptions
Field Description
31–16
Reserved
This read-only field is reserved and always has the value zero.
15–0
COMPARE
Compare Value
When the LPTMR is enabled and the CNR equals the value in the CMR and increments, TCF is set and
the hardware trigger asserts until the next time the CNR increments. If the CMR is 0, the hardware trigger
will remain asserted until the LPTMR is disabled. If the LPTMR is enabled, the CMR must be altered only
when TCF is set.
Memory map and register definition
K20 Sub-Family Reference Manual, Rev. 2, Feb 2012
834 Freescale Semiconductor, Inc.