Information

Table 24. 16-bit ADC characteristics (V
REFH
= V
DDA
, V
REFL
= V
SSA
) (continued)
Symbol Description
Conditions
1
Min.
Typ.
2
Max. Unit Notes
SFDR Spurious free
dynamic range
16 bit differential mode
• Avg=32
16 bit single-ended mode
• Avg=32
82
78
95
90
—
—
dB
dB
7
E
IL
Input leakage
error
I
In
× R
AS
mV I
In
=
leakage
current
(refer to
the MCU's
voltage
and
current
operating
ratings)
Temp sensor
slope
–40°C to 105°C — 1.715 — mV/°C
V
TEMP25
Temp sensor
voltage
25°C — 719 — mV
1. All accuracy numbers assume the ADC is calibrated with V
REFH
= V
DDA
2. Typical values assume V
DDA
= 3.0 V, Temp = 25°C, f
ADCK
= 2.0 MHz unless otherwise stated. Typical values are for
reference only and are not tested in production.
3. The ADC supply current depends on the ADC conversion clock speed, conversion rate and the ADLPC bit (low power).
For lowest power operation the ADLPC bit should be set, the HSC bit should be clear with 1MHz ADC conversion clock
speed.
4.
1 LSB = (V
REFH
- V
REFL
)/2
N
5. ADC conversion clock <16MHz, Max hardware averaging (AVGE = %1, AVGS = %11)
6. Input data is 100 Hz sine wave. ADC conversion clock <12MHz.
7. Input data is 1 kHz sine wave. ADC conversion clock <12MHz.
Peripheral operating requirements and behaviors
K20 Sub-Family Data Sheet, Rev. 4 5/2012.
Freescale Semiconductor, Inc. 39