Information

USBx_USBCTRL field descriptions
Field Description
7
SUSP
Places the USB transceiver into the suspend state.
0 USB transceiver is not in suspend state.
1 USB transceiver is in suspend state.
6
PDE
Enables the weak pulldowns on the USB transceiver.
0 Weak pulldowns are disabled on D+ and D–.
1 Weak pulldowns are enabled on D+ and D–.
5–0
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
42.5.25 USB OTG Observe register (USBx_OBSERVE)
Provides visibility on the state of the pull-ups and pull-downs at the transceiver. Useful
when interfacing to an external OTG control module via a serial interface.
Address: 4007_2000h base + 104h offset = 4007_2104h
Bit 7 6 5 4 3 2 1 0
Read DPPU DPPD 0 DMPD 0 0
Write
Reset
0 1 0 1 0 0 0 0
USBx_OBSERVE field descriptions
Field Description
7
DPPU
Provides observability of the D+ Pullup . enable at the USB transceiver
0 D+ pullup disabled.
1 D+ pullup enabled.
6
DPPD
Provides observability of the D+ Pulldown . enable at the USB transceiver
0 D+ pulldown disabled.
1 D+ pulldown enabled.
5
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
4
DMPD
Provides observability of the D� Pulldown . enable at the USB transceiver
0 D– pulldown disabled.
1 D– pulldown enabled.
3–1
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
0
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
Chapter 42 Universal Serial Bus OTG Controller (USBOTG)
K20 Sub-Family Reference Manual, Rev. 1.1, Dec 2012
Freescale Semiconductor, Inc.
Preliminary
1059
General Business Information