Information

11.14.3 Global Pin Control High Register (PORTx_GPCHR)
Only 32-bit writes are supported to this register.
Address: Base address + 84h offset
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0 0
W
GPWE GPWD
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
PORTx_GPCHR field descriptions
Field Description
31–16
GPWE
Global Pin Write Enable
Selects which Pin Control Registers (31 through 16) bits [15:0] update with the value in GPWD. If a
selected Pin Control Register is locked then the write to that register is ignored.
0 Corresponding Pin Control Register is not updated with the value in GPWD.
1 Corresponding Pin Control Register is updated with the value in GPWD.
15–0
GPWD
Global Pin Write Data
Write value that is written to all Pin Control Registers bits [15:0] that are selected by GPWE.
11.14.4 Interrupt Status Flag Register (PORTx_ISFR)
The pin interrupt configuration is valid in all digital pin muxing modes. The Interrupt
Status Flag for each pin is also visible in the corresponding Pin Control Register, and
each flag can be cleared in either location.
Address: Base address + A0h offset
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
ISF
W
w1c
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
PORTx_ISFR field descriptions
Field Description
31–0
ISF
Interrupt Status Flag
Each bit in the field indicates the detection of the configured interrupt of the same number as the field.
Introduction
K20 Sub-Family Reference Manual, Rev. 1.1, Dec 2012
248
Preliminary
Freescale Semiconductor, Inc.
General Business Information