Information

2. The channel is selected by arbitration for servicing.
3. eDMA engine writes: TCDn_CSR[DONE] = 0, TCDn_CSR[START] = 0,
TCDn_CSR[ACTIVE] = 1.
4. eDMA engine reads: channel TCDn data from local memory to internal register file.
5. The source to destination transfers are executed as follows:
a. Read byte from location 0x1000, read byte from location 0x1001, read byte from
0x1002, read byte from 0x1003.
b. Write 32-bits to location 0x2000 → first iteration of the minor loop.
c. Read byte from location 0x1004, read byte from location 0x1005, read byte from
0x1006, read byte from 0x1007.
d. Write 32-bits to location 0x2004 → second iteration of the minor loop.
e. Read byte from location 0x1008, read byte from location 0x1009, read byte from
0x100A, read byte from 0x100B.
f. Write 32-bits to location 0x2008 → third iteration of the minor loop.
g. Read byte from location 0x100C, read byte from location 0x100D, read byte
from 0x100E, read byte from 0x100F.
h. Write 32-bits to location 0x200C → last iteration of the minor loop.
6. eDMA engine writes: TCDn_SADDR = 0x1010, TCDn_DADDR = 0x2010,
TCDn_CITER = 1.
7. eDMA engine writes: TCDn_CSR[ACTIVE] = 0.
8. The channel retires → one iteration of the major loop. The eDMA goes idle or
services the next channel.
9. Second hardware, that is, eDMA peripheral, requests channel service.
10. The channel is selected by arbitration for servicing.
11. eDMA engine writes: TCDn_CSR[DONE] = 0, TCDn_CSR[START] = 0,
TCDn_CSR[ACTIVE] = 1.
12. eDMA engine reads: channel TCD data from local memory to internal register file.
13. The source to destination transfers are executed as follows:
a. Read byte from location 0x1010, read byte from location 0x1011, read byte from
0x1012, read byte from 0x1013.
Chapter 21 Direct Memory Access Controller (eDMA)
K20 Sub-Family Reference Manual, Rev. 1.1, Dec 2012
Freescale Semiconductor, Inc.
Preliminary
461
General Business Information