Information
Table 32-115. Compare modes
SC2[AC
FGT]
SC2[AC
REN]
ADCCV1
relative to
ADCCV2
Function Compare mode description
0 0 — Less than threshold Compare true if the result is less than the
CV1 registers.
1 0 — Greater than or equal to threshold Compare true if the result is greater than or
equal to CV1 registers.
0 1 Less than or
equal
Outside range, not inclusive Compare true if the result is less than CV1
Or the result is greater than CV2.
0 1 Greater than Inside range, not inclusive Compare true if the result is less than CV1
And the result is greater than CV2.
1 1 Less than or
equal
Inside range, inclusive Compare true if the result is greater than or
equal to CV1 And the result is less than or
equal to CV2.
1 1 Greater than Outside range, inclusive Compare true if the result is greater than or
equal to CV1 Or the result is less than or
equal to CV2.
With SC2[ACREN] =1, and if the value of CV1 is less than or equal to the value of CV2,
then setting SC2[ACFGT] will select a trigger-if-inside-compare-range inclusive-of-
endpoints function. Clearing SC2[ACFGT] will select a trigger-if-outside-compare-
range, not-inclusive-of-endpoints function.
If CV1 is greater than CV2, setting SC2[ACFGT] will select a trigger-if-outside-
compare-range, inclusive-of-endpoints function. Clearing SC2[ACFGT] will select a
trigger-if-inside-compare-range, not-inclusive-of-endpoints function.
If the condition selected evaluates true, SC1n[COCO] is set.
Upon completion of a conversion while the compare function is enabled, if the compare
condition is not true, SC1n[COCO] is not set and the conversion result data will not be
transferred to the result register, Rn. If the hardware averaging function is enabled, the
compare function compares the averaged result to the compare values. The same compare
function definitions apply. An ADC interrupt is generated when SC1n[COCO] is set and
the respective ADC interrupt is enabled, that is, SC1n[AIEN]=1.
Note
The compare function can monitor the voltage on a channel
while the MCU is in Wait or Normal Stop modes. The ADC
interrupt wakes the MCU when the compare condition is met.
Functional description
K20 Sub-Family Reference Manual, Rev. 1.1, Dec 2012
750
Preliminary
Freescale Semiconductor, Inc.
General Business Information