Information

FTMx_FILTER field descriptions (continued)
Field Description
11–8
CH2FVAL
Channel 2 Input Filter
Selects the filter value for the channel input.
The filter is disabled when the value is zero.
7–4
CH1FVAL
Channel 1 Input Filter
Selects the filter value for the channel input.
The filter is disabled when the value is zero.
3–0
CH0FVAL
Channel 0 Input Filter
Selects the filter value for the channel input.
The filter is disabled when the value is zero.
37.3.20 Fault Control (FTMx_FLTCTRL)
This register selects the filter value for the fault inputs, enables the fault inputs and the
fault inputs filter.
Address: Base address + 7Ch offset
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R
0
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
0
FFVAL
FFLTR3EN FFLTR2EN FFLTR1EN FFLTR0EN
FAULT3EN FAULT2EN FAULT1EN FAULT0EN
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
FTMx_FLTCTRL field descriptions
Field Description
31–12
Reserved
This field is reserved.
This read-only field is reserved and always has the value 0.
11–8
FFVAL
Fault Input Filter
Selects the filter value for the fault inputs.
The fault filter is disabled when the value is zero.
Table continues on the next page...
Chapter 37 FlexTimer Module (FTM)
K20 Sub-Family Reference Manual, Rev. 1.1, Dec 2012
Freescale Semiconductor, Inc.
Preliminary
873
General Business Information