Information

TSIx_STATUS field descriptions (continued)
Field Description
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
25
ERROF9
TouchSensing Error Flag 9
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
24
ERROF8
TouchSensing Error Flag 8
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
23
ERROF7
TouchSensing Error Flag 7
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
22
ERROF6
TouchSensing Error Flag 6
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
21
ERROF5
TouchSensing Error Flag 5
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
20
ERROF4
TouchSensing Error Flag 4
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
19
ERROF3
TouchSensing Error Flag 3
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
18
ERROF2
TouchSensing Error Flag 2
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
17
ERROF1
TouchSensing Error Flag 1
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
16
ERROF0
TouchSensing Error Flag 0
This bit indicates when the corresponding electrode is shorted to VDD or VSS. If the GENCS[ERIE] bit is
set, an error interrupt is generated. Write a one to clear this bit.
15
ORNGF15
Touch Sensing Electrode Out-of-Range Flag 15
This bit indicates when the corresponding electrode is out of range. If the GENCS[TSIIE] bit is set and the
GENCS[ESOR] bit is cleared, an out-of-range interrupt is generated. Write a one to clear this bit.
14
ORNGF14
Touch Sensing Electrode Out-of-Range Flag 14
Table continues on the next page...
Memory map and register definition
K20 Sub-Family Reference Manual, Rev. 6, Nov 2011
1584 Freescale Semiconductor, Inc.