Information

The state of any given channel’s interrupt request is directly affected by writes to this
register; it is also affected by writes to the CINT register. On writes to INT, a 1 in any bit
position clears the corresponding channel’s interrupt request. A zero in any bit position
has no affect on the corresponding channel’s current interrupt status. The CINT register is
provided so the interrupt request for a single channel can easily be cleared without the
need to perform a read-modify-write sequence to the INT register.
Address: DMA_INT is 4000_8000h base + 24h offset = 4000_8024h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
R
0
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Bit
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
INT15 INT14 INT13 INT12 INT11 INT10
INT9 INT8 INT7 INT6 INT5 INT4 INT3 INT2 INT1 INT0
W
w1c w1c w1c w1c w1c w1c
w1c w1c w1c w1c w1c w1c w1c w1c w1c w1c
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
DMA_INT field descriptions
Field Description
31–16
Reserved
This read-only field is reserved and always has the value zero.
15
INT15
Interrupt Request 15
0 The interrupt request for corresponding channel is cleared
1 The interrupt request for corresponding channel is active
14
INT14
Interrupt Request 14
0 The interrupt request for corresponding channel is cleared
1 The interrupt request for corresponding channel is active
13
INT13
Interrupt Request 13
0 The interrupt request for corresponding channel is cleared
1 The interrupt request for corresponding channel is active
12
INT12
Interrupt Request 12
0 The interrupt request for corresponding channel is cleared
1 The interrupt request for corresponding channel is active
11
INT11
Interrupt Request 11
Table continues on the next page...
Memory map/register definition
K20 Sub-Family Reference Manual, Rev. 6, Nov 2011
450 Freescale Semiconductor, Inc.