Information

Table 28-27. Read 1s Block Command FCCOB Requirements (continued)
FCCOB Number FCCOB Contents [7:0]
3 Flash address [7:0]
1
in the flash block to be verified
4 Read-1 Margin Choice
1. Must be longword aligned (Flash address [1:0] = 00).
After clearing CCIF to launch the Read 1s Block command, the FTFL sets the read
margin for 1s according to Table 28-28 and then reads all locations within the selected
program flash block.
Table 28-28. Margin Level Choices for Read 1s Block
Read Margin Choice Margin Level Description
0x00 Use the 'normal' read level for 1s
0x01 Apply the 'User' margin to the normal read-1 level
0x02 Apply the 'Factory' margin to the normal read-1 level
Table 28-29. Read 1s Block Command Error Handling
Error Condition Error Bit
Command not available in current mode/security FSTAT[ACCERR]
An invalid margin choice is specified FSTAT[ACCERR]
Program flash is selected and the address is out of program flash range FSTAT[ACCERR]
Flash address is not longword aligned FSTAT[ACCERR]
Read-1s fails FSTAT[MGSTAT0]
28.4.10.2 Read 1s Section Command
The Read 1s Section command checks if a section of program flash memory is erased to
the specified read margin level. The Read 1s Section command defines the starting
address and the number of phrases to be verified.
Table 28-30. Read 1s Section Command FCCOB Requirements
FCCOB Number FCCOB Contents [7:0]
0 0x01 (RD1SEC)
1 Flash address [23:16] of the first phrase to be verified
2 Flash address [15:8] of the first phrase to be verified
3 Flash address [7:0]
1
of the first phrase to be verified
4 Number of phrases to be verified [15:8]
5 Number of phrases to be verified [7:0]
Table continues on the next page...
Chapter 28 Flash Memory Module (FTFL)
K20 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc. 627