Information

33.8.1.3 Sampled, Non-Filtered Mode (#s 3A & 3B)
+
-
IRQ
INTERNAL BUS
INP
INM
FILTER_CNT
INV
COUT
COUT
OPE
SE
CMPO to
PAD
(TO OTHER SOC FUNCTIONS)
COUTA
1
WE
0
SE=1
CGMUX
COS
FILT_PER
1
0
+
-
FILT_PER
COS
0x01
IER/F CFR/F
WINDOW/SAMPLE
1
0
EN,PMODE,HYSTCTR[1:0]
Polarity
Select
Window
Control
Filter
Block
Interrupt
Control
Clock
Prescaler
divided
bus
clock
CMPO
bus clock
Figure 33-28. Sampled, Non-Filtered (# 3A): Sampling point externally driven
In Sampled, Non-Filtered mode, the analog comparator block is powered and active. The
path from analog inputs to COUTA is combinational (unclocked). Windowing Control is
completely bypassed. COUTA is sampled whenever a rising edge is detected on the Filter
Block clock input.
The only difference in operation between Sampled, Non-Filtered (# 3A) and Sampled,
Non-Filtered (# 3B) is in how the clock to the Filter Block is derived. In #3A, the clock to
filter block is externally derived while in #3B, the clock to filter block is internally
derived.
The comparator filter has no other function than sample/hold of the comparator output in
this mode (# 3B).
Chapter 33 Comparator (CMP)
K20 Sub-Family Reference Manual, Rev. 6, Nov 2011
Freescale Semiconductor, Inc. 791