Datasheet

2. It covers digital pins.
3. Analog pins are defined as pins that do not have an associated general purpose I/O port function.
5 General
5.1 AC electrical characteristics
Unless otherwise specified, propagation delays are measured from the 50% to the 50%
point, and rise and fall times are measured at the 20% and 80% points, as shown in the
following figure.
Figure 1. Input signal measurement reference
All digital I/O switching characteristics assume:
1. output pins
• have C
L
=30pF loads,
• are configured for fast slew rate (PORTx_PCRn[SRE]=0), and
• are configured for high drive strength (PORTx_PCRn[DSE]=1)
2. input pins
• have their passive filter disabled (PORTx_PCRn[PFE]=0)
5.2 Nonswitching electrical specifications
5.2.1 Voltage and current operating requirements
Table 1. Voltage and current operating requirements
Symbol Description Min. Max. Unit Notes
V
DD
Supply voltage 1.71 3.6 V
V
DDA
Analog supply voltage 1.71 3.6 V
V
DD
– V
DDA
V
DD
-to-V
DDA
differential voltage –0.1 0.1 V
V
SS
– V
SSA
V
SS
-to-V
SSA
differential voltage –0.1 0.1 V
Table continues on the next page...
General
K60 Sub-Family, Rev5, 10/2013.
12 Freescale Semiconductor, Inc.