Datasheet

Table 10. General switching specifications (continued)
Symbol Description Min. Max. Unit Notes
• 1.71 ≤ V
DD
≤ 2.7V
• 2.7 ≤ V
DD
≤ 3.6V
• Slew enabled
• 1.71 ≤ V
DD
≤ 2.7V
• 2.7 ≤ V
DD
≤ 3.6V
—
—
—
—
18
9
48
24
ns
ns
ns
ns
—
—
—
—
t
io60
Port rise and fall time (high drive strength)
• Slew disabled
• 1.71 ≤ V
DD
≤ 2.7V
• 2.7 ≤ V
DD
≤ 3.6V
• Slew enabled
• 1.71 ≤ V
DD
≤ 2.7V
• 2.7 ≤ V
DD
≤ 3.6V
—
—
—
—
6
3
28
14
ns
ns
ns
ns
6
—
—
—
—
t
io60
Port rise and fall time (low drive strength)
• Slew disabled
• 1.71 ≤ V
DD
≤ 2.7V
• 2.7 ≤ V
DD
≤ 3.6V
• Slew enabled
• 1.71 ≤ V
DD
≤ 2.7V
• 2.7 ≤ V
DD
≤ 3.6V
—
—
—
—
18
6
48
24
ns
ns
ns
ns
7
—
—
—
—
1. This is the minimum pulse width that is guaranteed to pass through the pin synchronization circuitry. Shorter pulses may or
may not be recognized. In Stop, VLPS, LLS, and VLLSx modes, the synchronizer is bypassed so shorter pulses can be
recognized in that case.
2. The greater synchronous and asynchronous timing must be met.
3. This is the minimum pulse width that is guaranteed to be recognized as a pin interrupt request in Stop, VLPS, LLS, and
VLLSx modes.
4. 75 pF load
5. 15 pF load
6. 25 pF load
7. 15 pF load
5.4 Thermal specifications
5.4.1 Thermal operating requirements
Table 11. Thermal operating requirements
Symbol Description Min. Max. Unit
T
J
Die junction temperature –40 125 °C
T
A
Ambient temperature –40 105 °C
General
K60 Sub-Family, Rev5, 10/2013.
Freescale Semiconductor, Inc. 23