Datasheet

Table 17. Oscillator frequency specifications (continued)
Symbol Description Min. Typ. Max. Unit Notes
f
osc_hi_1
Oscillator crystal or resonator frequency — high-
frequency mode (low range)
(MCG_C2[RANGE]=01)
3 — 8 MHz 1
f
osc_hi_2
Oscillator crystal or resonator frequency — high
frequency mode (high range)
(MCG_C2[RANGE]=1x)
8 — 32 MHz
f
ec_extal
Input clock frequency (external clock mode) — — 60 MHz 2, 3
t
dc_extal
Input clock duty cycle (external clock mode) 40 50 60 %
t
cst
Crystal startup time — 32 kHz low-frequency,
low-power mode (HGO=0)
— 1000 — ms ,
Crystal startup time — 32 kHz low-frequency,
high-gain mode (HGO=1)
— 500 — ms
Crystal startup time — 8 MHz high-frequency
(MCG_C2[RANGE]=01), low-power mode
(HGO=0)
— 0.6 — ms
Crystal startup time — 8 MHz high-frequency
(MCG_C2[RANGE]=01), high-gain mode
(HGO=1)
— 1 — ms
1. Frequencies less than 8 MHz are not in the PLL range.
2. Other frequency limits may apply when external clock is being used as a reference for the FLL or PLL.
3. When transitioning from FEI or FBI to FBE mode, restrict the frequency of the input clock so that, when it is divided by
FRDIV, it remains within the limits of the DCO input clock frequency.
NOTE
The 32 kHz oscillator works in low power mode by default and
cannot be moved into high power/gain mode.
6.3.3 32 kHz oscillator electrical characteristics
6.3.3.1 32 kHz oscillator DC electrical specifications
Table 18. 32kHz oscillator DC electrical specifications
Symbol Description Min. Typ. Max. Unit
V
BAT
Supply voltage 1.71 — 3.6 V
R
F
Internal feedback resistor — 100 — MΩ
C
para
Parasitical capacitance of EXTAL32 and XTAL32 — 5 7 pF
V
pp
1
Peak-to-peak amplitude of oscillation — 0.6 — V
1. When a crystal is being used with the 32 kHz oscillator, the EXTAL32 and XTAL32 pins should only be connected to
required oscillator components and must not be connected to any other devices.
Peripheral operating requirements and behaviors
K60 Sub-Family, Rev5, 10/2013.
Freescale Semiconductor, Inc. 33