Datasheet

7 Dimensions
7.1 Obtaining package dimensions
Package dimensions are provided in package drawings.
To find a package drawing, go to freescale.com and perform a keyword search for the
drawing’s document number:
If you want the drawing for this package Then use this document number
256-pin MAPBGA 98ASA00346D
8 Pinout
8.1 Pins with active pull control after reset
The following pins are actively pulled up or down after reset:
Table 62. Pins with active pull control after reset
Pin Active pull direction after reset
PTA0 pulldown
PTA1 pullup
PTA3 pullup
PTA4 pullup
RESET_b pullup
8.2 K61 Signal Multiplexing and Pin Assignments
The following table shows the signals available on each pin and the locations of these
pins on the devices supported by this document. The Port Control Module is responsible
for selecting which ALT functionality is available on each pin.
256
MAP
BGA
Pin Name Default ALT0 ALT1 ALT2 ALT3 ALT4 ALT5 ALT6 ALT7 EzPort
E2 PTE0 ADC1_SE4a ADC1_SE4a PTE0 SPI1_PCS1 UART1_TX SDHC0_D1 I2C1_SDA RTC_CLKOUT
Dimensions
K70 Sub-Family Data Sheet, Rev. 5, 10/2013.
86 Freescale Semiconductor, Inc.