Datasheet

200.00E-06
250.00E-06
300.00E-06
350.00E-06
000.00E+00
50.00E-06
100.00E-06
150.00E-06
'1-1 '1-2 '1-2 '1-4
1 2 4
VLPR Mode Current VS Core Frequency
Temperature = 25, VDD = 3, CACHE = Enable, Code Residence = Flash, Clocking Mode = BLPE
All Peripheral CLK Gates
CLK Ratio
Flash-Core
Core Freq (MHz)
Current Consumption on VDD (A)
All Off
All On
Figure 3. VLPR mode current vs. core frequency
2.2.6 EMC performance
Electromagnetic compatibility (EMC) performance is highly dependent on the
environment in which the MCU resides. Board design and layout, circuit topology
choices, location and characteristics of external components as well as MCU software
operation play a significant role in EMC performance. The system designer must
consult the following Freescale applications notes, available on freescale.com for
advice and guidance specifically targeted at optimizing EMC performance.
• AN2321: Designing for Board Level Electromagnetic Compatibility
• AN1050: Designing for Electromagnetic Compatibility (EMC) with HCMOS
Microcontrollers
• AN1263: Designing for Electromagnetic Compatibility with Single-Chip
Microcontrollers
General
Kinetis KL05 32 KB Flash, Rev4 03/2014. 15
Freescale Semiconductor, Inc.