Datasheet

1.4 Voltage and current operating ratings
Table 4. Voltage and current operating ratings
Symbol Description Min. Max. Unit
V
DD
Digital supply voltage –0.3 3.8 V
I
DD
Digital supply current — 120 mA
V
IO
IO pin input voltage –0.3 V
DD
+ 0.3 V
I
D
Instantaneous maximum current single pin limit (applies to
all port pins)
–25 25 mA
V
DDA
Analog supply voltage V
DD
– 0.3 V
DD
+ 0.3 V
2 General
2.1 AC electrical characteristics
Unless otherwise specified, propagation delays are measured from the 50% to the 50%
point, and rise and fall times are measured at the 20% and 80% points, as shown in the
following figure.
Figure 1. Input signal measurement reference
All digital I/O switching characteristics, unless otherwise specified, assume the output
pins have the following characteristics.
• C
L
=30 pF loads
• Slew rate disabled
• Normal drive strength
2.2 Nonswitching electrical specifications
General
Kinetis KL05 32 KB Flash, Rev4 03/2014. 5
Freescale Semiconductor, Inc.