Datasheet

Table 8. Power mode transition operating behaviors (continued)
Symbol Description Min. Typ. Max. Unit
— 93 115 μs
• VLLS3 → RUN
— 42 53 μs
• LLS → RUN
— 4 4.6 μs
• VLPS → RUN
— 4 4.4 μs
• STOP → RUN
— 4 4.4 μs
1. Normal boot (FTFA_FOPT[LPBOOT]=11).
2.2.5 Power consumption operating behaviors
The maximum values stated in the following table represent characterized results
equivalent to the mean plus three times the standard deviation (mean + 3 sigma).
Table 9. Power consumption operating behaviors
Symbol Description Min. Typ. Max.
1
Unit Notes
I
DDA
Analog supply current — — See note mA 2
I
DD_RUNCO
Run mode current in compute operation - 48
MHz core / 24 MHz flash / bus clock disabled,
code of while(1) loop executing from flash
• at 3.0 V
— 4.0 4.3 mA
3
I
DD_RUN
Run mode current - 48 MHz core / 24 MHz bus
and flash, all peripheral clocks disabled, code
executing from flash
• at 3.0 V
— 4.9 5.3 mA
3
I
DD_RUN
Run mode current - 48 MHz core / 24 MHz bus
and flash, all peripheral clocks enabled, code
executing from flash
• at 3.0 V
• at 25 °C
• at 125 °C
—
—
5.7
6.0
5.8
6.2
mA
3, 4
I
DD_WAIT
Wait mode current - core disabled / 48 MHz
system / 24 MHz bus / flash disabled (flash
doze enabled), all peripheral clocks disabled
• at 3.0 V
— 2.7 2.9 mA
3
Table continues on the next page...
General
Kinetis KL05 32 KB Flash, Rev4 03/2014. 9
Freescale Semiconductor, Inc.